HP laserjet 4200/4300 print server? - jetdirect print server
Hello, I have an HP LaserJet 4200/4300 Series. It seems that somehow the printer is reset, and failure to recognize the print server. When printing the configuration page that no longer exists, the IP address or provide the message I / O card. Pdf doc told me to check the print server administrator's guide for troubleshooting, but I do not know where you to connect the printer to the print server you accept to be found. My driver HP Jetdirect jet is at 615 N.
Monday, January 18, 2010
Jetdirect Print Server HP Laserjet 4200/4300 Print Server?
Subscribe to:
Post Comments (Atom)
1 comments:
This is not an uncommon problem. Basically its Jetdirect 615n network card has gone bad. I had to replace many of them in my work for the customers of the same problem. You can try to remove and replace the 615N to see if it helps. The other thing you can do is a cold reset of the printer installed with the 615N. This also sets the 615n, but not the problem, especially for her work is a kind of a long shot. The only other solution that will replace it with a 615N or 615N property preferably a 620N, because they so far seem to be reliable.
To perform a cold reset (this also reset the printer settings to their default values will be back when something special is the setting that you configure if you need to be completed):
1 Turn the printer on.
2 Hold the sign up button (SELECT button), then turn on the printer.
3 Continue holding the big check-button (SELECT button) until the three LEDs flashing on the control panel when the printer, then stays lit. This can take up to 10 secondsds.
4 After the message SELECT LANGUAGE appears on the screen, press the Up-or. Down Arrow button until COLD RESET is highlighted.
5 Press the big brands (SELECT button). The printer performs a cold reset and then uses its power-up sequence.
6 Check all I / O configuration, and restore all the steps to the parameters of the printer.
If you do not, a second network configuration page have impression that you need a new JetDirect card.
Best of luck.
Post a Comment